SPC Performance

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 4 degree taper. Six shims per box.Installation...

These heavy-duty caster axle shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3-1/2 degree taper. Six shims per box.Installation...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 3 degree taper. Six shims per box.Installation...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 2-1/2 degree taper. Six shims per box.Installation...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 2 degree taper. Six shims per box.Installation...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1-1/2 degree taper. Six shims per box.Installation...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1 degree taper. Six shims per box.Installation...

For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits per pack.

For Kwik Way Models SDL,DL,850 Disc Lathe,NDL,BDL,CBL----- Kwi-Lathe On-The-Car #108-0005-04 ROTUNDA,LINE-O-TRONICS---- Kwik-Way part# 109-1092-23---- Rels Model SW504 Swing Arm -Rels Part #...

These heavy-duty axle caster shims can also be used to adjust pinion angle on Jeep CJs and similar vehicles with 1-3/4" to 2" wide leaf springs. 1/2 degree taper. Six shims per box.Installation...

This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes.Installation Instructions

This 1/2" square drive impact socket is deep and thin walled to reach areas conventional sockets can't reach. Each socket provides two sizes.Installation Instructions

A must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This...

An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal. CAUTION: Use only according to directions packaged with product.Installation Instructions

This sleeve puller will pull both O.E. and most aftermarket camber/caster sleeves quickly and efficiently, usually without damaging the ears of the sleeve. Heat treated high strength steel...

This tool is specifically designed for use on the Ford Super duty trucks as well as most other light trucks and vans as well. The extra long bar gives you maximum leverage to loosen rusted sleeves...

The 76000 Mercedes C & E Class Rear Bushing Press Adapter Kit is designed for quick, easy removal of the OE rear control arm bushings and for the installation of the new adjustable camber bushings...

The 75990 Mercedes Rear Bushing Press Adaptor Set is designed for quick, easy removal of the OE rear control arm bushings and for insertion of new adjustable camber bushings. This tool set is a must...

Honda Adapter #75980 is used in conjuction with the 72509 ball joint pressadn are used with the #67465 Honda Civic camber kit. You need these adapters to push the old bushing out of the stock arm...

This set (4 different sizes - 2 of each) aligns caliper to rotor after installation of a camber shim. Specifically designed to be used with the EZ Shim when correcting some FWD cars with hub mounted...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

This cutter, a must for properly cutting our EZ Shims (TM), is a great tool for a variety of cutting needs. Its thin cutting blades help prevent breakage and waste.Installation Instructions

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

A patanted Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable...