SPC Performance

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Taper: 7.12deg, Stud Length +0.25" Over OE. Includes: Ball joint boot, ball stud,...

With SPC's rebuilt kit you can replace the ball joint or customize the stud length for ride height altered vehicles. Taper: 9.5deg, Stud Length: +0.25" over OE. Includes: Ball joint boot, ball stud,...

This heavy duty, drop forged alloy steel, lever-type ball joint and tie rod end remover provides good leverage action to remove stubborn tie rod ends or break ball joint tapers easily. Use when space...

Five tools in one, this handy kit consists of three drop forged forks and two handles. One handle is for use with a hammer and one is designed to fit an air hammer. All forks are threaded to...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Small black rubber gasket-type silencer band for solid rotors. DIMENSIONS: 1/4" x 3/8" x 6-1/2" diameter. California Residents WARNINGInstallation Instructions

Large black rubber gasket-type silencer band for solid rotors. DIMENSIONS: 1/4" x 3/8" x 9" diameter California Residents WARNINGInstallation Instructions

Boot replacement kit for SPC Audi arms. These fit the all 81350, 81360, 81370 and 81380 series arms. The kit includes 2 boots and 4 snap rings to service 2 control arms. California Residents...

The OE rear toe link bushing on many Subarus and the Scion FR-S can be easily removed when using the 67647 Bushing Press Adapter. Our Eccentric Toe Bushings (part# 67660) can then be installed using...

Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by servicing the...

Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service kit. Mechanical power screw quickly and easily removes worn bushings and installs them...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Double the range of rear camber and toe adjustment on the popular Camaro to increase handling performacne and minimize tire wear. Remove and replace the OE cam bolts with our 87430 kit for +- 1.0deg...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

This cam bolt kit changes camber up to 2-1/2deg. It includes an adjusting plate to make the camber adjustment possible. After elongating the lower strut/spindle bolt hole with a rotary file, install...

These heavy duty adjusters provide up to +-2-1/2deg front camber change for Chysler/Dodge/Plymouth Mini-Vans and FWD cars along with VW Routans. Use Rotary File Set 85130 to elo ngate holes...

Use this adjustable rear upper control arm to replace the OE arm and get +-3deg of camber on the Lexus IS250, IS350, GS350, and RC350 models. SPC's adjustable camber link is manufactured from...

Use this kit to replace stripped or bent OE alignment cam assemblies on the Mazda Miata MX-5. SPC's cams are heat treated to prevent stripping or warping. This kit is available per wheel and allows...

This Board Set includes our most popular cam bolt kits. This is a "must have" for any shop performing 4 wheel alignments on passenger cars. Shipped with our high-strength polymer display board ...

FITS MODEL#S 8911,8922,8944,8989,8991,8993------ OEM #433795----POSITIVE RAKE----3 CUT EDGES 5 bits per pack. California Residents WARNING

for Accu-Turn Model #s 8911,8922,8989,8991,8993 OEM #433796-------POSITIVE RAKE-----3 CUT EDGES 10 bits per pack. California Residents WARNING

For Rels Models 204C,204D,204S,205DC,415- Rels part # 29687V For Van Norman Models 243XV,204C,204D,204S,205DC,415 Van Norman Part # 129687,866561 ----3 cut edges----positive rake 10 bits per...

For Model #S 1000,1001,3000,4000,4100,7000,7700---------- On-vehicle lathe 700,705,710---------DRUMSIDE ON 3850 OEM # 6914-6-----12 CUT EDGES----NEGATIVE RAKE 6 bits per pack. California...