SPC Performance

For Pro-Cut Model 610 On-The-Car Lathe---- Pro-Cut Part # 50-701---- 3 cut edges ---- positive rake for Fords 10 bits per pack.

For Pro-Cut Model 610 On-The-Car---- Pro-Cut Part# 50-741 Positive rake carbide---- 3 cut edges----positive rake for Fords 6 bits per pack.

RIGHT HAND AND LEFT HAND TOOL HOLDERS 3/8" Square Shank Fits ALL TOOL, AMMCO, HUNTER, PERFORMANCE, and RELS.-- Complete with Carbide Insert No. 06610. Number 06700 includes 2 holders, one right hand...

For Model #s 1000,1001,3000,4000,4100,7000,7700------- On-vehicle lathe 700,705,710------- Drum side on 3850------12-18 cut edges----round bits for round tool holders 10 bits per pack.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

For Model # 1000,1001,3000,4000,4100,7000,7700------ On-vehicle lathe 700,705,710----Drum side on 3850 Ammco part # 6914-10-----12 CUT EDGES---- NEGATIVE RAKE 10 bits per pack.

For Model #S 1000,1001,3000,4000,4100,7000,7700---------- On-vehicle lathe 700,705,710---------DRUMSIDE ON 3850 OEM # 6914-6-----12 CUT EDGES----NEGATIVE RAKE 6 bits per pack. California...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

Designed for the low-profile clamps used to hold C.V. Boots on FWD vehicles. The 02099 comes complete with a ratchet. We recommend using this tool when istalling our #87365 Crown victoria camber kit...

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits all FMC/JOHN BEAN Brake Lathes and ACCU-TURN. Complete with one carbide Insert No. 407----FMC/JOHN BEAN, ACCU-TURNInstallation Instructions

RIGHT HAND TOOL HOLDER 3/8" Square Shank Fits all FMC/JOHN BEAN Brake Lathes and ACCU-TURN. Complete with one carbide Insert No. 407----FMC/JOHN BEAN, ACCU-TURNInstallation Instructions

Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter...

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062---Installation...

RIGHT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062---Installation...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

00080 drum silencer fits any passanger car drums. Made of natural rubber. It wraps around the drum and is secured with a buckle. DIMENSIONS: 1-3/4" wide, 72" longInstallation Instructions

This standard style silencer fits on top of the cutting tools, deflecting chips and damping chatter. Fits John Bean/FMC and Accuturn.Installation Instructions

Fits any ventilated rotor and is made of natural rubber with lead weight inserts. It easily wraps around rotor to deaden vibration and chatter. Fits John Bean/FMC and Accuturn. DIMENSIONS: 32"...

Designed for the PRO CUT on car lathes this silencer fits on top of the cutting tools, deflecting chips and dampening the chatter series.Installation Instructions